Every machine needs people's care during use, otherwise there will be some unnecessary trouble. So, how do you take effective maintenance methods for professional gas boilers ? In the process of normal use, we must not only pay attention to the effect of the gas-fired hot water boiler at all times, but also take some effective measures to increase its use.
This curing method is suitable for boilers that have been shut down but have not been serviced for more than a week. You can drain all the water from the pot, then clean the scale in the oven and refill with qualified demineralized water. Use a warm fire regularly to keep the water temperature of the summer gas hot water boiler at 10 degrees. Left and right, it cannot be frozen in winter; the boiler should also supply water regularly to keep the pressure in the boiler to a normal value to prevent air from entering the drum.
2. Wet maintenance
This maintenance method applies to gas-fired hot water boilers that have been closed for less than a month. After the furnace is turned off, the boiler water is drained according to the prescribed time to remove internal impurities. All inlet holes and valves should be closed and completely separated from the boiler in operation; then prepared with special mercury. Put the alkaline protective fluid in the boiler; a micro-oven should be used regularly to keep the heated surface dry throughout the maintenance period.
3. Drying maintenance
Dry maintenance is suitable for gas hot water boilers with long downtime. It is also necessary to drain and remove impurities, and secondly, to completely isolate the boiler during operation; use an appropriate amount of desiccant in the boiler to absorb moisture, and require that the desiccant not directly contact the heated surface of the boiler. Within one month, check that the desiccant is placed in the boiler and that it is not corroding.
The above is the method to solidify the gas hot water boiler from three aspects. When using the boiler, check it regularly, paying special attention to the corrosion of the steel plate. Ignoring corrosion issues for long periods of time can have unpredictable consequences. Therefore, maintenance is essential for high-stability gas-fired hot water boilers.